System Password Settings Configuration; User Account And Password Parameter Defaults By Security Mode - Enterasys C5G124-24 Configuration Manual

Password Management Overview
Table 5-1 User Account and Password Parameter Defaults by Security Mode (continued)
Parameter
Minimum number of characters in password
Allow consecutively repeating characters in
password
Aging of system passwords
Password required at time of new user account
creation
Substring matching at password validation
New users required to change password at first
log in
Lockout based on inactivity
Lockout based on failed login attempts
Lockout period duration after unsuccessful logins
Grace period after password expiration
Grace login limit
Warning period

System Password Settings Configuration

Refer to the CLI Reference for your platform for detailed information about the commands listed
below in
Procedure 5-3 Configuring System Password Settings
Step
1.
5-8 User Account and Password Management
Procedure 5-3.
Task
Configure system level password settings.
All parameters are optional but at least one must
be entered with the command.
Normal Mode Default
8
yes
disabled
no
0 (no checking)
no
0 (no activity checking)
3 failed attempts
15 minutes
0
0
20 days
Command(s)
set system password
[aging {days | disable}]
[allow-duplicates {yes | no}]
[allow-repeating-chars {num | yes}]
[change-first-login {yes | no}]
[change-frequency minutes]
[grace-limit {logins}]
[grace-period {days}]
[history {size}]
[length {#ofChars}]
[min-required-chars
{[uppercase #ofChars]
[lowercase #ofChars]
[numeric #ofChars]
[special #ofChars]}]
[require-at-creation {yes | no}]
[substring-match-len #ofChars]
[warning-period {days}]
C2 Mode Default
9
2 characters
90 days
yes
0 (no checking)
yes
90 days of inactivity
3 failed attempts
1 minute
30 days
3
20 days