Enterasys C5G124-24 Configuration Manual page 304

Port Traffic Rate Limiting
When a CoS is configured with an inbound rate limiter (IRL), and that IRL CoS is configured as
part of a policy profile using the set policy profile command, CoS-based inbound rate limiting
will take precedence over port rate limits set with set port ratelimit.
Examples
This example displays the current ratelimit configuration on port fe.1.1.
System(su)->show port ratelimit fe.1.1
Global Ratelimiting status is disabled.
Port
Number
--------
fe.1.1
fe.1.1
This example globally enables rate limiting and then configures rate limiting for inbound traffic
on port fe.1.1, index 1, priority 0-3, to a threshold of 125 kilobytes per second.
System(su)->set port ratelimit enable
System(su)->set port ratelimit fe.1.1 0-3 125 enable inbound 1
System(su)->show port ratelimit fe.1.1
Global Ratelimiting status is enabled.
Port
Number
--------
fe.1.1
fe.1.1
This example returns rate limit parameters for port fe.1.1 to their default values.
System(su)->clear port ratelimit fe.1.1
System(su)->show port ratelimit fe.1.1
Global Ratelimiting status is enabled.
Port
Number
--------
fe.1.1
fe.1.1
17-18 Configuring Quality of Service
Threshold
Index (KBytes)
-------- --------
1 64
2 64
Threshold
Index (KBytes)
-------- --------
1 125
2 64
Threshold
Index (KBytes)
-------- --------
1 64
2 64
Action Direction
------------ ---------- -----------
discard inbound
discard inbound
Action Direction
------------ ---------- -----------
discard inbound
discard inbound
Action Direction
------------ ---------- -----------
discard inbound
discard inbound
Priority
List Status
---------
0-3 disabled
4-7 disabled
Priority
List Status
---------
0-3 enabled
4-7 disabled
Priority
List Status
---------
0-3 disabled
4-7 disabled