Enterasys C5G124-24 Configuration Manual page 84

User Account Overview
Procedure 5-2
it as the emergency access account.
Refer to the CLI Reference for your platform for details about the commands listed below.
Procedure 5-1 Creating a New Read-Write or Read-Only User Account
Step
1.
2.
3.
4.
This example enables a new user account named "guest" with read-only privileges and allows
access only between 8:00 am and 5:00 pm on Mondays through Wednesdays. The password for
this account is then set, and the configured login accounts are displayed.
C5(su)->set system login guest read-only enable allowed-interval 08:00 17:00
allowed-days Mon Tue Wed
C5(su)->set password guest
Please enter new password: ********
Please re-enter new password: ********
Password changed.
C5(su)->show system login
Username
admin
ro
rw
guest
Procedure 5-2
account. In addition, the default super-user account, admin, is disabled as a security measure.
Procedure 5-2 Configuring a New Super-User / Emergency Access User Account
Step
1.
2.
3.
5-4 User Account and Password Management
on page 5-4 shows how a super-user creates a new super-user account and assigns
Task
Create a new read-write or read-only user login
account and enable it.
(All other parameters are optional.)
Set the password for the new account.
Respond appropriately to the system prompts.
Display the new user account.
Remove a local login user account
or
Disable an existing account
Access State
super-user enabled
read-only enabled
read-write enabled
read-only enabled
creates a new super-user account and assigns it as the emergency access user
Note: You can delete the default admin account, but deletion of the last remaining super-user
account is prevented (that is, a super-user account must be created before the admin account can
be deleted).
If the security mode is C2, the last remaining super-user account must also be set as the
emergency access user in order to allow the default admin account to be deleted.
Task
Create a new super-user login account and
enable it.
(All other parameters are optional.)
Set the password for this account.
Display the login user accounts
Command(s)
set system login username {read-
write|read-only} enable
set password username
show system login
clear system login username
set system login username disable
Aging Simul Local
Login Only?
0 0 no
0 0 no
0 0 no
0 0 no
Command(s)
set system login username super-user
enable
set password username
show system login
Login Access Allowed
Start End Days
***access always allowed***
***access always allowed***
***access always allowed***
08:00 17:00 mon tue wed