Intel® Server Board S5500WB TPS
3.3.3
Installing or Replacing the Processor
3.3.3.1
Installing the Processor
To install a processor, follow these instructions:
1. Turn off all peripheral devices connected to the server.
2. Turn off the server.
3. Disconnect the AC power cord from the server.
4. Remove the server's cover. See the document that came with your server chassis for
instructions on removing the server's cover.
5. Locate the processor socket and raise the raise the load lever of the ILM cover
completely. (see letter ―A‖ in the figure below).
6. Open the load plate (see letter ―B‖ in Figure 10 and letter ―C‖ in Figure 11).
7. Remove the protective socket cover. (See letter ―D‖ in Figure 11)
8. Align the pins of the processor with the socket and insert the processor into the
socket.
Revision 1.9
Figure 10. Lifting the load lever of ILM cover
Figure 11. Removing the socket cover
Intel order number E53971-008
Functional Architecture
.
17