Figure 25. Removing Drive Cage Emi Shield From Chassis (Dp/Ws/Brp Configuration Shown) - Intel S3210SHLC - Entry Server Board Motherboard User Manual

3. Remove the left side cover. For instructions, see
4. Remove the front bezel assembly. For instructions, see
Assembly".
5. Loosen thumb screw and remove the drive cage EMI shield (see letter "A" in the
following figure).
Figure 25. Removing Drive Cage EMI Shield from Chassis (DP/WS/BRP configuration
6. Remove any PCI add-in boards that use the PCI card guide. For instructions, see
"Removing PCI Add-in
Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
shown)
Boards".
Hardware Installations and Upgrades
"Removing the Left Side
"Removing the Front Bezel
A
B
TP01869
Cover".
27