Removing And Installing The Front Bezel Assembly; Removing The Front Bezel Assembly; Figure 14. Removing Front Bezel Assembly (Dp/Ws/Brp Configuration Shown) - Intel S3210SHLC - Entry Server Board Motherboard User Manual

Removing and Installing the Front Bezel Assembly

All configurations of the Intel
front bezel assembly.

Removing the Front Bezel Assembly

1. Observe the safety and ESD precautions listed in
2. Turn off all peripheral devices connected to the server. Turn off the server.
3. Disconnect the AC power cord.
4. Remove the left side cover. For instructions, see
5. Disengage the two bezel tabs from the left side of the chassis (see letter "A" in the
following figure). Rotate the left side of the front bezel assembly outward slightly (see
letter "B"). Disengage the three clips that attach the right side of the front bezel
assembly to the chassis and remove (see letter "C").

Figure 14. Removing Front Bezel Assembly (DP/WS/BRP configuration shown)

Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
®
Entry Server Chassis SC5299-E ship with a two-piece
A
A
B
TP02034
Hardware Installations and Upgrades
Appendix A, "Safety
"Removing the Left Side
C
C
C
Information".
Cover".
17