Server Chassis Features
NOTES:
1. For updated server board support, go to http://support.intel.com/support/motherboards/server/
chassis/sc5299-e/.
Table 2
Dimensions (pedestal)
Dimensions (rack)
Hard drive cage
Peripherals
Front panel
Front Panel LEDs and
displays
Power Supply
Fans
2
summarizes the features of the Intel
Table 2. Server Chassis Features
Feature
•
17.8 in (45.2 cm) high with feet; 17.6 in (44.7 cm) without feet
•
9.256 in (23.5 cm) wide
•
19.2 in ( 48.7 cm) deep
•
9.256 in (23.5 cm) high without rack bezel; 10.3 in (26.2 cm) high
with rack bezel
•
17.6 in (44.7 cm) wide
•
19.2 in (48.7 cm) deep
•
One removable fixed hard drive cage that can accept up to 6 tool-
less cabled 3.5-in x 1-in hard drives.
NOTE: An optional SCSI or SAS/SATA hot swap backplane hard
•
Two tool-less 5.25-in device drive bays for CD-ROM, DVD-ROM
drive, or tape drive
•
One for the DP/WS/BRP chassis configurations.
•
NIC1 Activity
•
NIC2 Activity
•
Power / Sleep
•
Hard Drive Activity
•
System Status
•
NMI
NOTE:
Wattage of power supply is dependent on configuration of server
chassis purchased:
•
UP - ships with a 420-W PFC tool-less fixed power supply
•
DP - ships with a 550-W PFC tool-less fixed power supply
•
WS - ships with a 670-W PFC tool-less fixed power supply
•
BRP - ships with a 650-W PFC redundant power supply module
in a 1+0 configuration. An additional module can be purchased
as an accessory to create a 1+1 configuration.
•
One 120-mm system fan
•
One power supply fan
•
Processor fans for active thermal solution
•
Fan with optional hot swap drive kit upgrade
•
Fixed hard drive fan with WS chassis configuration
Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
®
Entry Server Chassis SC5299-E.
Description
drive cage (capable of handling up to 6 SCSI, SATA or SAS
hot-swappable hard drives) can be purchased to replace the
fixed hard drive cage.
1