7 Installing Additional Processors
Introduction
The HP NetServer LH 3000/3000r supports two processors in primary and
secondary slots. The NetServer ships with one processor and an accompanying
VRM in the primary slots. The processor and VRM are on the system board.
Primary
Processor
Secondary
Processor
Configuration Guidelines
CAUTION
Figure 7-1. System Board
Do not remove the processor from its bag until you are ready
to install it. Make sure the bag remains sealed.
Before you remove a processor from the anti-static container,
touch a grounded, unpainted metal surface on the HP
NetServer to discharge static electricity.
Primary
Configuration
VRM
Switches
Secondary
VRM
71