Video Input; Input Source Selection (Video, S-Video) - Sanyo PLC-XU116 - 4500 Lumens Owner's Manual

Video Input

Direct Operation
Choose Video or S-video by pressing the INPUT button on
the top control or the VIDEO button on the remote control.
Remote Control
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point

Use the Point
▲▼
S-video and then press the SELECT button.
When video input signal is connected to the
Video
VIDEO jack, select Video.
When video input signal is connected to the S-
S-video
VIDEO jack, select S-video.
Note:
• Network is for the Network function. See the owner's
manual of "Network Set-up and Operation" .
• When the Input Search function is set to On1 or On in
the Auto setup function, the input signal will be searched
automatically (p.49).

Input Source Selection (Video, S-video)

VIDEO button
Video
S-video
buttons to select Input and
▲▼
or the SELECT button.
►
buttons to select either Video or
INPUT button
Top Control
(Component) / (Scart))
digital) / RGB(AV HDCP) /
Input Menu
Video
Computer1 ((RGB) /
Computer (RGB(PC
RGB(Analog))
Video
S-video
Network
RGB
RGB(PC digital)
Wired 1
RGB
RGB(PC digital)
Wired 1
41