Video System Selection - Sanyo PLC-XU116 - 4500 Lumens Owner's Manual

1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
►

Use the Point buttons to select Video, S-video
▲▼
or Computer 1(Component) and then press the
SELECT button.
3
Use the Point buttons to select System and then
▲▼
press the Point or the SELECT button. Use the Point
►
buttons to select the desired system and then
▲▼
press the SELECT button.
Video or S-video
Auto
The projector automatically detects an incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the system
manually.
PAL/SECAM/NTSC/NTSC4 .43/PAL-M/PAL-N
If the projector can not reproduce proper video image,
select a specific broadcast signal format from among PAL,
SECAM, NTSC, NTSC 4 .43, PAL-M and PAL-N.
Component
Auto
The projector automatically detects an incoming video
signal, and adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector can not reproduce proper video image, select
a specific component video signal format among 480i, 55i,
480p, 55p, 0p, 1035i and 1080i.
Note:
The AV System Menu can not be selected when selecting
RGB (Scart).

Video System Selection

buttons to select Input and
▲▼
or the SELECT button.
AV System Menu (Video or S-video)
AV System Menu (Component)
Video Input
Video
Component
43