Screen Size Adjustment - Sanyo PLC-XU116 - 4500 Lumens Owner's Manual

Store
To store the adjusted data, select Store and press the Point
or the SELECT button. Use the Point
►
select one from Image 1 to 4 and press the SELECT button.
A confirmation box appears and then select yes. Stored
data can be called up by selecting an Image (1–4) in the
Image Mode Selection on page 37.
This projector has the picture screen resize function, which
enables you to customize the image size.
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
►

Use the Point buttons select the desired item and
▲▼
then press the SELECT button .
Normal
Provide the image to fit the screen size.
True
Provide the image in its original size. When the original
image size is larger than the screen size (1024 x 768), the
projector enters to the panning mode automatically. Use the
Point buttons to pan the image. When adjusted, the
▲▼◄►
arrows will turn red. When reached to the correction limits,
the arrows will disappear.
wide
Provide the image to fit the wide video aspect ratio (16:9) by
expanding the image width uniformly. This function can be
used for providing a squeezed video signal at 16:9.
Full
Provide the full screen image.
Note:
• The Screen Menu, except for Normal and Custom, can not be operated when 0p, 1035i or 1080i is
selected in the PC System Menu (p.33).
• This projector can not display any resolution higher than 1920 x 1200. If your computer's screen resolution is
higher than it, reset the resolution to the lower before connecting to the projector.
• The image data in other than 1024 x 768 is modified to fit the screen size in initial mode.
• True, Full and Digital zoom +/– can not be selected when 480i, 55i, 480p or 55p is selected in the PC
System Menu (p.33).
buttons to
▲▼

Screen Size Adjustment

buttons to select Screen and
▲▼
or the SELECT button.
A confirmation box appears and
then select yes.
Screen Menu
Computer Input
39