Manual Pc Adjustment - Sanyo PLC-XU116 - 4500 Lumens Owner's Manual

Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector.
Manual PC adjustment enables you to precisely adjust several parameters to match those signal formats. The
projector has five independent memory areas to store those parameters manually adjusted. It allows you to recall
the setting for a specific computer.
1
Press the MENU button to display the On-Screen Menu.
Use the Point buttons to select PC adjust and then
▲▼
press the Point or the SELECT button.
►

Use the Point buttons to select the desired item
▲▼
and then press the SELECT button to display the
adjustment dialog box. Use the Point ◄► buttons to
adjust the setting value.
Fine sync
Use the Point buttons to adjust the value, eliminating a
◄►
flicker from the image displayed (from 0 to 31).
Total dots
Use the Point buttons to adjust the number of total dots
◄►
in one horizontal period to match your PC image.
Horizontal
Use the Point buttons to adjust the horizontal picture
◄►
position.
Vertical
Use the Point buttons to adjust the vertical picture
◄►
position.
Clamp
Use the Point buttons to adjust the clamp level. When
◄►
the image has dark bars, try this adjustment.
Display area H
Use the Point buttons to adjust the horizontal area
◄►
displayed by this projector.
Display area V
Use the Point buttons to adjust the vertical area
◄►
displayed by this projector.

Manual PC adjustment

PC adjust Menu
Computer Input
35