For detailed functions of each menu, see "Menu Tree" on pages 72-73.
Main Menu
Input
Used to select an input source from Computer 1, Computer , Video, S-video or Network
PC adjust
Select Auto PC adj ., Fine sync, Total dots, Horizontal, Vertical, Clamp, Display area H and Display area V to adjust
the parameters to match with the PC input signal format (p.33-36).
Image select
For computer source, used to select an image mode among Dynamic, Standard, Real, Blackboard(Green),
Colorboard and image 1 - 4 (p.37).
For Video source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green) ,
Colorboard and Image 1- 4 (p.44).
Image adjust
For computer source, used to adjust computer image [Contrast, Brightness, Color temp ., white balance (R/G/B),
Sharpness and Gamma] (pp.38-39).
For Video source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp ., white balance (R/G/
B), Sharpness, Gamma, Noise reduction and Progressive] (pp.45-46).
Screen
For computer source, used to adjust size of the image [ Normal, True, wide, Full, Custom and Digital zoom +/–]
(pp.39-40).
For Video source, used to set size of image [Normal, wide and Custom] (p.47).
Sound
Used to adjust the volume or mute the sound (p.28).
Setting
Used to set the projector's operating configurations (pp.48-61).
Information
Display the input source information: Input, H-sync freq ., V-sync freq ., Screen, Language, Lamp status, Lamp
counter, Power management, Key lock, PIN code lock and Remote control (p.62).
Network
See the owner's manual of "Network Set-up and Operation".
Guide
The key operation is displayed.
Menu Bar
Sub-Menu
Basic Operation
(pp.31-32, 41-42).
5