Zoom And Focus Adjustment; Auto Setup Function - Sanyo PLC-XU116 - 4500 Lumens Owner's Manual

Basic Operation
Rotate the Zoom Lever to zoom in and out.
Rotate the Focus Ring to adjust the focus of the image.
Auto setup function is provided to automatically execute
the setting of Auto setup (includes Input search, Auto PC
adj. and Auto Keystone functions) in the setting menu by
just pressing the AUTO SETUP/CANCEL button on the top
control or the AUTO SET/CANCEL button on the remote
control. Refer to page 49 for the setting of the Auto setup
function.
Note:
• Auto Keystone corrects vertical distortion only; it does
not correct horizontal distortion.
• Auto Keystone can not work when Ceiling feature is set
to On in the Setting menu (p.54).
• Perfect correction of the image distortion can not be
ensured with the Auto setup function. If the distortion
can not be corrected properly by pressing the AUTO
SETUP/CANCEL or AUTO SET/CANCEL button, adjust
manually by pressing the KEYSTONE button on the
remote control or selecting Keystone in the Setting
menu (p.50).
• Fine sync, Total dots, Horizontal and Vertical
position of some computers can not be fully adjusted
with the Auto PC adjustment function. When the image
is not provided properly with this operation, manual
adjustments are required (pp.35-36).
6

Zoom and Focus Adjustment

Auto Setup Function

Zoom Lever
Focus Ring
Top Control
AUTO SETUP/CANCEL button
Remote Control
AUTO SET/CANCEL button