Video Input; Input Source Selection (Video, S-Video) - Sanyo PLC-XU4000 Owner's Manual

Choose Video or S-video by pressing the INPUT button on
the top control, or the VIDEO button or the S-VIDEO button
on the remote control.
Before using INPUT button, correct input source should be
selected through menu operation as described below.
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
2
Use the Point
S-video and then press the SELECT button.
When video input signal is connected to the
Video
VIDEO jack, select Video.
When video input signal is connected to the
S-video
S-VIDEO jack, select S-video.
 Note:
When the Input Search function is set to On1 or On2 in
the Auto setup function, the input signal will be searched
automatically (p.47).
38
Downloaded From projector-manual.com Sanyo Manuals

Input Source Selection (Video, S-video)

Direct Operation
Menu Operation
buttons to select Input and
▲▼
or the SELECT button.
►
buttons to select either Video or
▲▼

Video Input

Top Control
Remote Control
Input Menu
INPUT button
Computer 1(RGB) /
(Component) / (RGB(Scart))
Computer 2(RGB)
Video
S-video
VIDEO button
Video
S-VIDEO button
S-video