Marvell Serial Ata 6.0 Gb/S Connectors (7-Pin Sata_6G_1/2 [Gray]) - Asus P7P55D-E DELUXE User Manual

3. Marvell Serial ATA 6.0 Gb/s connectors (7-pin SATA_6G_1/2 [gray])
®
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
•
•
•
2-34
These connectors are set to Standard IDE mode by default. In Standard IDE mode,
you can connect Serial ATA data hard disk drives to these connectors.
You must install Windows
®
hard disk drives.
When using hot-plug and NCQ, set the Marvell Controller item in the BIOS to [AHCI
Mode]. Refer to section 3.6.3 Onboard Devices Configuration for details.
XP Service Pack 2 or later versions before using Serial ATA
Chapter 2: Hardware information