Creating A Raid Volume - Asus P7P55D-E DELUXE User Manual

The navigation keys at the bottom of the screen allow you to move through the menus
and select the menu options.
The RAID BIOS setup screens shown in this section are for reference only and may not
exactly match the items on your screen.
The utility supports maximum four hard disk drives for RAID configuration.

Creating a RAID volume

To create a RAID set
From the utility main menu, select 1. Create RAID Volume and press <Enter>. The
1.
following screen appears.
Intel(R) Matrix Storage Manager option ROM v8.9.0.1014 PCH-D wRAID5
Copyright(C) 2003-09 Intel Corporation.
Enter a unique volume name that has no special characters and is
[↑↓]Change
2. Enter a name for the RAID set and press <Enter>.
When the RAID Level item is selected, press the up/down arrow key to select a RAID
3.
mode to create, and then press <Enter>.
When the Disks item is selected, press <Enter> to select the hard disk drives you want
4.
to include in the RAID set. The SELECT DISKS screen appears.
Port Drive Model
0 ST3160812AS
1 ST3160812AS
2 ST3160812AS
3 ST3160812AS
Select 2 to 6 disks to use in creating the volume.
[ ↑↓ ]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done
ASUS P7P55D-E Deluxe
[ CREATE VOLUME MENU
Name: Volume0
RAID Level: RAID0(Stripe)
Disks: Select Disks
Strip Size: 128KB
Capacity: 0.0
Sync: N/A
Create Volume
[ HELP ]
16 characters or less.
[TAB]-Next [ESC]-Previous Menu
[ SELECT DISKS ]
Serial # Size
9LS0HJA4 149.0GB
9LS0F4HL 149.0GB
3LS0JYL8 149.0GB
9LS0BJ5H 149.0GB
All Rights Reserved.
]
GB
[ENTER]-Select
Status
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
4-13