Intel ® B150 Serial Ata 6.0 Gb/S Connectors (7-Pin Sata6G_1~6) - Asus B150-PLUS D3 User Manual

1.7.2 Internal connectors
1. Serial port connector (10-1 pin COM)
This connector is for a serial (COM) port. Connect the serial port module cable to this
connector, then install the module to a slot opening at the back of the system chassis.
B150-PRO D3/B150-PLUS D3 Serial port (COM) connector
The COM module is purchased separately.
2. Intel B150 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1~6)
®
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
B150-PRO D3/B150-PLUS D3 Intel
When using hot-plug and NCQ, set the SATA Mode Selection item in the BIOS to [AHCI].
See section SATA Configuration for details.
1-16
B150-PRO D3
B150-PLUS D3
A
B150-PRO D3
B150-PLUS D3
B
COM
PIN 1
A
SATA6G_3
SATA6G_1
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXN1
RSATA_RXP1
GND
SATA6G_5
SATA6G_2
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXN2
RSATA_RXP2
GND
SATA 6.0Gb/s connectors
®
Chapter 1: Product introduction
B
SATA6G_4
SATA6G_6