Intel ® P55 Serial Ata Connectors (7-Pin Sata 1-6) - Asus P7P55D-E DELUXE User Manual

2. Intel P55 Serial ATA connectors (7-pin SATA 1-6)
®
These connectors connect to Serial ATA hard disk drives and optical disc drives via
Serial ATA signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel
chipset.
• These connectors are set to Standard IDE mode by default. In Standard IDE mode,
you can connect Serial ATA boot/data hard disk drives to these connectors. If you
intend to create a Serial ATA RAID set using these connectors, set the Configure
SATA as item in the BIOS to [RAID]. Refer to section 3.4.2 Storage Configuration for
details.
Before creating a RAID set, refer to section 4.4 RAID configurations or the manual
•
bundled in the motherboard support DVD.
• You must install Windows
ATA hard disk drives. The Serial ATA RAID feature is available only if you are using
Windows
When using hot-plug and NCQ, set the Configure SATA as in the BIOS to [AHCI].
•
Refer to section 3.4.2 Storage Configuration for details.
ASUS P7P55D-E Deluxe
Matrix Storage Technology through the onboard Intel
®
XP Service Pack 2 or later versions before using Serial
®
XP SP2 or later versions.
®
P55
®
2-33