Asus Ez Flash 2 Utility - Asus P7P55D-E DELUXE User Manual

3.2.2

ASUS EZ Flash 2 utility

The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS-based
utility.
Before you start using this utility, download the latest BIOS from the ASUS website at www.
asus.com.
To update the BIOS using EZ Flash 2
1. Insert the USB flash disk that contains the latest BIOS file to the USB port, and then
launch EZ Flash 2 in any of these two ways:
• Press <Alt> + <F2> during POST.
Enter the BIOS setup program. Go to the Tools menu to select EZ Flash 2 and
•
press <Enter> to enable it.
Press <Tab> to switch between drives until the correct BIOS file is found.
FLASH TYPE:
PATH:
A:
Note
[Enter] Select or Load
[Up/Down/Home/End] Move
2. When the correct BIOS file is found, EZ Flash 2 performs the BIOS update process
and automatically reboots the system when done.
•
•
Ensure to load the BIOS default settings to ensure system compatibility and stability. Select
the Load Setup Defaults item under the Exit menu. Refer to section 3.10 Exit Menu for
details.
3-4
ASUSTek EZ Flash 2 BIOS ROM Utility V4.00
MXIC 25L8005
Current ROM
BOARD: P7P55D-E Deluxe
VER: 0209
DATE: 07/28/2009
A:\
Only a USB flash disk with FAT 32/16 format and single partition can support the
ASUS EZ Flash 2 utility.
DO NOT shut down or reset the system while updating the BIOS to prevent system
boot failure!
Update ROM
BOARD: Unknown
VER: Unknown
DATE: Unknown
[Tab] Switch [V] Drive Info
[B] Backup [Esc] Exit
Chapter 3: BIOS setup