4.
JMicron
JMB363 Serial ATA connector (7-pin SATA_E1 [black])
®
This connector connects to a Serial ATA hard disk drive or optical disc drive via a Serial
ATA signal cable.
5.
TurboV Remote connector (5-pin TURBO_CON)
This connector is for the bundled TurboV Remote. TurboV Remote allows you to turn
on/off the computer, adjust EPU modes and system bus speed, and launch Turbo Key
profiles for system overclocking without interrupting on-going work or games. You can
also clear BIOS setup information by pressing the Clear CMOS key on the back of the
TurboV Remote.
•
Firmly hold the connector to remove TurboV Remote. DO NOT force or the cable will
be broken.
•
Ensure to install the TurboV Remote driver from the motherboard support DVD. Refer
to section 4.2 Support DVD information for details.
Refer to section 4.3.4 ASUS EPU-6 Engine for related software details.
•
ASUS P7P55D-E Deluxe
2-35