Creating A Raid Volume - Asus PC-DL Deluxe User Manual

5.5.4 Creating a RAID Volume

To create a RAID 0 volume:
1. Select the option 1. Create RAID Volume from the Main menu, then
press <Enter>. The Create Array menu appears.
Intel(R) Integrated RAID for Serial ATA - RAID Configuration Utility
Copyright(C) 2003 Intel Corporation. All Rights Reserved. v3.x.x.xxxx
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and
[ [
2. Type a name for your RAID volume using 1 to 16 characters (letters
and/or numbers, no special characters). Press <Enter>.
3. Use the Up and Down arrow keys to select the stripe size for the
RAID 0 array. Press <Enter> to make the selection.
The available values range from 8 KB to 128 KB. The default is 64
KB. Select a stripe value from the following suggestions depending
on your planned drive usage.
• 16 KB - low disk usage
• 64 KB - typical disk usage
• 128 KB - performance disk usage
4. Highlight Create Volume then press <Enter> to create the array.
Press Y when a confirmation message appears.
5. Scroll down to option 4. Exit and press <Enter> to exit the RAID
configuration utility. Press Y when a confirmation message appears.
5-20
[ CREATE ARRAY MENU
Name:
Stripe Size:
RAID Level:
Capacity:
can not contain special characters.
]-Change ]-Change [TAB]-Next [TAB]-Next
Are you sure you want to create this volume (Y/N)
]
RAID_Volume1
64KB
RAID0(Striping)
37.2GB
Create Volume
[ HELP ]
[ESC] Previous Menu [ESC] Previous Menu [Enter]-Select [Enter]-Select
Chapter 5: Driver installation