Wds Bridge Mode - EnGenius ENH202 User Manual

Client Bridge's IP setting must match to the Access Point's subnet.

10.3 WDS Bridge Mode

Use this feature to link multiple APs in a network. All clients associated with any APs can
communicate each other like an ad-hoc mode.
WDS Bridge
Step1
Step2
Step3
Step4
Step5
Step6
Step7
Step8
Each WDS bridge's device must use the same Subnet, Wireless Mode, Wireless
Channel, and Security Setting.
Login to the web-based configuration interface with default IP
192.168.1.1
Select your country or region's regulation.
Select Operation Mode to WDS Bridge from System
Properties.
Select channel you would like to use.
Setup the authentication settings
Setup WDS Link Settings.
Specify the AP's MAC address you would like to connect with.
Press Apply to process all the configurations.