Pppoe (Point-To-Point Protocol Over Ethernet) - EnGenius ENH202 User Manual

8.1.3 PPPoE (Point-to-Point Protocol over Ethernet)

Select PPPoE as your WAN connection type if your ISP provides Username and Password.
PPPoE is a DSL service and please remove your PPPoE software from your computer, the
software is not worked in ENH202.
Internet Connection
Type
MTU
Login
Password
Service Name
Select PPPoE to begin configuration of the PPPoE connection.
Specify the Maximum Transmit Unit size. Suggest remain in Auto.
Specify the Username that is given by your ISP.
Specify the Password that is given by your ISP.
Specify the Service Name that is given by your ISP.