Management Vlan - EnGenius ENH202 User Manual

9.2 Management VLAN

Click on the Management VLAN link under the Management menu. This option allows you
to assign a VLAN tag to the packets. A VLAN is a group of computers on a network whose
software has been configured so that they behave as if they were on a separate Local Area
Network (LAN). Computers on VLAN do not have to be physically located next to one another
on the LAN
Management VLAN ID
Accept / Cancel
1. If you reconfigure the Management VLAN ID, you may lose connection to the ENH202.
Verify DHCP server can support the reconfigured VLAN ID, and then re-connect to the new IP
address.
2. Accept does not compile the changes, you must go to Status -> Save/Load to apply the
new settings. Please refer to the chapter 4.1 for more detail.
If your network includes VLANs and if tagged packets need to
pass through the Access Point, specify the VLAN ID into this field.
If not, select the No VLAN tag radio button.
Press Accept to confirm the changes or Cancel to return previous
settings.