EnGenius ENH202 User Manual page 7

Client Bridge Mode
WDS Mode
Client Router Mode
Multiple SSIDs
VLAN
QoS
Wi-Fi Protect Access
information. It has support adjusting transmit power and channel.
Client can access the network with different regulatory settings
and automatically change to the local regulations.
Use this feature to connect to an Access Point and enjoy the great
speed of surfing internet.
Use this feature to link multiple APs in a network, All clients
associated with any APs can communicate each other like an
ad-hoc mode.
This feature functions completely opposite but similarly with AP
Router Mode. Client Router connected to an AP wirelessly and
transmit internet connection protocol through AP to access the
internet.
ENH202 supports up to 4 SSIDs on your access point. The
following options can be set to each SS to each SSID:
SSID for public or private network
-
Authentication is fully supported
-
VLAN identifier
-
Radius accounting identifier
-
Profile isolation for infrastructure network
-
Specify a VLAN number for each SSID to separate the services
among clients.
Use this feature to limit the incoming or outgoing throughput.
Wi-Fi Protect Access is a standard-based interoperable security
enhancement that increases the level of data protection and
access control for existing and future wireless LAN system. It is
compatible with IEEE 802.11i standard WPA leverages TKIP and
802.1X for authenticated key management.