Network Configuration Example; Access Point; Acces Point - EnGenius ENH202 User Manual

Long range wireless access point / client bridge

Hide thumbs Also See for ENH202:

Table of Contents

10 Network Configuration Example

This chapter describes the role of the ENH202 with 4+1 modes. The Access Point mode's

default configuration is a central unit of the wireless network or as a root device of the wired

environment. Repeater mode and Mesh network mode need future configuration.

Access Point

Step1

Step2

Step3

Step4

Step5

Step6

Step7

Step8

For more advanced settings, please refer to the previous chapters.

Wireless Client

Step1

Step2

192.168.1.1

Select your country or region's regulation.

Use site survey to scan channels that have been used in nearby

area.

Select channel with less interferences.

Specify the SSID for your broadcast SSID and you can also

configure multiple SSID at the same time.

Verify VLAN identifier to separate services among clients

Setup the authentication settings.

Apply to process all the configurations.

Select wireless mode you would like to associate with.

Use site survey to scan nearby Access Point and select the certain

Table of Contents

Enh200ext