Not every Access Point device has support WDS in Access Point Mode. It is
recommended using ENH202 if you would like to use this service.
2.3 Client Bridge
In the Client Bridge Mode, the ENH202 function likes a wireless client connecting to an Access
Point wirelessly and surf internet whenever you want. Using Site Survey to scan all the Access
Point within the range and configure its SSID and Security Password to associate with it.
Connect you station to the LAN port of the ENH202 via Ethernet.
2.4 WDS Bridge
In the WDS Bridge Mode, the ENH202 can wirelessly connect different LANs by just simply
configure each other's MAC Address and Security Settings. This mode is used when two wired
LANs locate in small distance and want to communicate each other. The best solution is using
ENH202 wirelessly connect two wired LANs. WDS Bridge Mode can establish 16 WDS links,
the network diagram is like a Star.