Package Contents; System Requirement; Hardware Overview - EnGenius ENH202 User Manual

1.3 Package Contents

Open the package carefully, and make sure that none of the items listed below are missing.
Do not discard the packing materials, in case of return; the unit must be shipped in its original
package.
 1* Wireless Access Point / Client Bridge (ENH202)
 1* 24V/1A Power Adapter
 1* PoE Injector(EPE-24R)
 1* Pole Mount
 1* QIG
 1* CD (User Manual)
Using other Power Adapter than the one included with ENH202 may cause damage of the
device.

1.4 System Requirement

The following conditions are the minimum system requirement.
 A computer with an Ethernet interface and operating under Windows XP, Vista, 7 or
Linux.
 Internet Browser that supports HTTP and JavaScript.

1.5 Hardware Overview

Physical Interface
Data rate
LEDs status
- 1 x LAN Port with PoE support
- 1 x LAN Port
- 1 x Reset
300 Mbps
- Power Status
- LAN (10/100Mbps)
- WLAN (Wireless is up)
- 3 x Link Quality (Client Bridge mode)