How To Scan To A Computer; Scanning A Document; Scanning Using The Scan Key - Brother MFC-J625DW Basic User's Manual

11

How to scan to a computer

Scanning a document

There are several ways to scan documents.
You can use the SCAN key on the machine or
the scanner drivers on your computer.
a
To use the machine as a scanner, you
must install a scanner driver. If the
machine is on a Network, configure it
with a TCP/IP address.
Install the scanner drivers from the

CD-ROM. (uuQuick Setup Guide)
 Configure the machine with a TCP/IP
address if network scanning does not
work.
uuSoftware User's Guide:
Configuring Network Scanning for
®
Windows
uuSoftware User's Guide:
Configuring network scanning for
Macintosh
b
Load your document. (See How to load
documents uu page 28.)
 Use the ADF to scan multiple pages
of documents. It feeds each sheet
automatically.
 Use the scanner glass to scan a
page of a book or one sheet at a
time.
c
Do one of the following:
 To scan using the SCAN key, go to

Scanning using the SCAN key.

 To scan using a scanner driver at
your computer, go to Scanning using
a scanner driver.
62
Scanning using the
11
SCAN key
For more information
uuSoftware User's Guide: Using the Scan
key
a
Press
b
Press s or t to display the available
scan modes, and then press the scan
mode you want to use.

Scan to File

Scan to Media

Scan to email

Scan to OCR

Scan to Image

Web Service
(Web Services Scan)
1
(Macintosh users)
Presto! PageManager must be downloaded
and installed before use. See Accessing
Brother Support (Macintosh) uu page 5 for
further instructions.
2
(Windows
(uuSoftware User's Guide: Using Web
Services for scanning on your network
(Windows Vista
Windows
c
(For network users)
Choose the computer you want to send
the data to.
d
Press Start to begin scanning.
(SCAN).
1
2
®
users only)
®
SP2 or later and
®
7))
11
11