Brother MFC-J625DW Basic User's Manual page 83

Error Message
No Paper Fed
No Response/Busy
Not Registered
Out of Fax Memory
Cause
The Photo Paper Tray is in the Photo
printing position.
The machine is out of paper or paper
is not correctly loaded in the paper
tray.
The paper is jammed in the machine.
Paper dust has accumulated on the
surface of the paper pick-up rollers.
The Jam Clear Cover is not closed
correctly.
The number you dialled has not
answered or is busy.
You tried to access a Speed Dial
number that is not programmed.
The fax memory is full.
Troubleshooting
Action
Verify that the Photo Paper Tray is in
the Normal printing position.
(See step d and the Important note in
Loading photo paper uu page 19.)
Do one of the following:
 Refill the paper in the paper tray,
and then press Mono Start or
Colour Start.
 Remove the paper and load it
again, and then press Mono Start
or Colour Start. (See Loading
paper and other print media
uu page 14.)
Remove the jammed paper by
following the steps in Printer jam or
paper jam uu page 80.
If this error occurs often during duplex
copying or duplex printing, the paper
feed rollers may be stained with ink.
Clean the paper feed rollers.
(uuAdvanced User's Guide: Cleaning
the paper feed rollers)
Clean the paper pick-up rollers.
(uuAdvanced User's Guide: Cleaning
the paper pick-up rollers)
Check the Jam Clear Cover is closed
evenly at both ends. (See Printer jam
or paper jam uu page 80.)
Verify the number and try again.
Set up the Speed Dial number. (See
Storing Speed Dial numbers
uu page 52.)
Do one of the following:
 Clear the data in the memory. To
gain extra memory, you can turn
off Memory Receive.
(uuAdvanced User's Guide:
Turning off Memory Receive
operations)
 Print the faxes that are in the
memory.
(uuAdvanced User's Guide:
Printing a fax from the memory)
B
75