Stop Faxing; Setting Scanner Glass Size For Faxing; Colour Fax Transmission; Cancelling A Fax In Progress - Brother MFC-J625DW Basic User's Manual

Chapter 4
d
Enter the fax number.
Using the dial pad
Using Speed Dial

SpeedDial
Using call history

Outgoing

Incoming
e
Press Mono Start or Colour Start.
Faxing from the ADF
 The machine starts scanning the
document to be sent.
Faxing from the scanner glass
 If you pressed Mono Start, the
machine starts scanning the first
page. Go to step f.
 If you pressed Colour Start, the
LCD asks if you want to send a
colour fax. Press Yes (ColorFax)
to confirm. The machine starts
scanning and sending the document.
f
When the LCD asks you Next Page?,
do one of the following:
 To send a single page, press
No (Send) (or press Mono Start
again).
The machine starts sending the
document.
 To send more than one page, press
Yes and go to step g.
g
Place the next page on the scanner
glass.
Press OK.
The machine starts scanning the page.
(Repeat steps f and g for each
additional page.)
32

Stop faxing

To stop faxing, press Stop/Exit.
Setting scanner glass size for
faxing
When documents are Letter size, you need to
set Scan Size to Letter. If you do not, the side
portion of the faxes will be missing.
a
Press
4
b
Press Options.
c
Press s or t to display
Glass ScanSize.
4
d
Press Glass ScanSize.
e
Press A4 or Letter.
Note
• You can save the setting you use most
often by setting it as the default.
(uuAdvanced User's Guide: Setting your
changes as a new default)
• This setting is only available for sending
documents from the scanner glass.

Colour fax transmission

Your machine can send a colour fax to
machines that support this feature.
Colour faxes cannot be stored in the memory.
When you send a colour fax, the machine will
send it in real time (even if Real Time TX is
set to Off).

Cancelling a fax in progress

If you want to cancel a fax while the machine
is scanning, dialling or sending, press
Stop/Exit.
(FAX).
4
4
4
4