Brother MFC-J625DW Basic User's Manual page 93

IMPORTANT
• If the paper is jammed under the print
head, unplug the machine from the power
source, and then move the print head to
take out the paper.
• If the print head is in the right corner as
shown in the illustration, you cannot move
it. Re-connect the power cord. Hold down
Stop/Exit until the print head moves to the
centre. Then unplug the machine from the
power source and take out the paper.
• If ink gets onto your skin, immediately
wash with soap and plenty of water.
j
Using both hands, grasp the plastic tabs
on both sides of the machine and gently
close the scanner cover.
k
Push the two green levers back to the
original positions.
l
Push the paper tray firmly back into the
machine.
m
While holding the paper tray in place,
pull out the paper support until it clicks,
and then unfold the paper support flap.
Make sure you pull out the paper
support until it clicks.
IMPORTANT
DO NOT use the paper support flap for
Legal size paper. (Only available for some
countries.)
n
Re-connect the power cord.
Troubleshooting
B
85