Sharpness; Gamma; Noise Reduction; Progressive - Panasonic PT-VW435NU Operating Instructions Manual

Sharpness

1 ) Press ▲▼ to select [Sharpness].
2 ) Press the <ENTER> button to display
the adjustment dialog box.
3 ) Press ◄► to adjust the setting value.
Operation Adjustment
increase the
Press ►. sharpness of the
image
decrease the
Press ◄. sharpness of the
image
When [Daylight View] is set to [On] or [Auto], the
z
[Sharpness] is disabled.

Gamma

1 ) Press ▲▼ to select [Gamma].
2 ) Press the <ENTER> button to display
the adjustment dialog box.
3 ) Press ◄► to adjust the gamma value
to obtain a better balance of contrast.
Adjustments can be made between
z

Noise reduction

1 ) Press ▲▼ to select [Noise reduction].
2 ) Press the <ENTER> button to display
the adjustment dialog box.
3 ) Press ◄► to select the desired item.
Off Disabled
L 1 Lower reduction
L 2 Higher reduction
Noise interference on the screen can be
z
reduced. Select one of the above options to get
smoother images.
[Noise reduction] cannot be selected when
z
[480p], [576p], [720p], [1 035i] or [1 080i] is
selected.
Note
When input video signal to the projector, [Noise
z
reduction] will become available.

Progressive

1 ) Press ▲▼ to select [Progressive].
2 ) Press the <ENTER> button to display
the dialog box.
3 ) Press ◄► to select the desired item.
z
Adjustment
range
z
Maximum
value 15
Minimum
value 0
Note
When input video signal to the projector, [Progressive]
z
will become available.

Reset

To reset the adjusted data, all adjustments will return
to their previous figures.
1 ) Press ▲▼ to select [Reset].
0 and 15.
2 ) Press the <ENTER> button.
z
Note
To reset the adjusted data except [
z

Store

1 ) Press ▲▼ to select [Store].
2 ) Press ► or the <ENTER> button.
3 ) Press ▲▼ to select one from Image 1
to 4 and press the <ENTER> button.
z
Note
To store the adjusted data except [
z
Make sure you selected [Store] after adjusting
z
settings. Some settings can not be stored if not
registered with [Store] function.
Image adjust
An interlaced video signal can be displayed in
progressive mode. Select one of the following
options.
[Progressive] cannot be selected when [480p],
[576p], [720p], [1 035i] or [1 080i] is selected.
Off Disabled
L 1 For an active picture
L 2 For a still picture
Film For watching a film
A confirmation box appears and then select [Yes].
A confirmation box appears and then select [Yes].
Daylight View].
Daylight View ].
53
ENGLISH -