Image Select; Dynamic; Standard; Real - Panasonic PT-VW435NU Operating Instructions Manual

Image select

Select [Image select] from the Main Menu (see
"Navigating through the menu" on page 42),
then select the item from the sub-menu.
Remote Control

Dynamic

For viewing pictures in a bright room.
Press ▲▼ to select [Dynamic] and then
press the <ENTER> button.

Standard

Normal picture mode preset on the projector.
Press ▲▼ to select [Standard] and then
press the <ENTER> button.

Real

Picture mode with improved halftone for graphics.
Press ▲▼ to select [Real] and then press
the <ENTER> button.

Cinema

Picture mode adjusted with fine tone.
Press ▲▼ to select [Cinema] and then
press the <ENTER> button.
50
- ENGLISH
Control Panel

Blackboard(Green)

For the image projected on a blackboard.
Press ▲▼ to select [Blackboard(Green)]
and then press the <ENTER> button.
This mode helps enhance the image projected
z
on a blackboard. This is mainly effective on a
green colored board, not truly effective on a
black colored board.

Colorboard

For the image projected on a colorboard.
1 ) Press ▲▼ to select [Colorboard].
2 ) Press ► or the <ENTER> button to
display the submenu.
3 ) Press ▲▼ to select a color, and press
the <ENTER> button.
At the time of simple projection on the colored
z
wall, you can get the close color image to the
color image projected on a white screen by
selecting the similar color to the wall color from
the preset four colors (Red, Blue, Yellow and
Green).

Image 1-4

For viewing with the user preset image mode in the
Image adjust Menu. This Image memory is provided
in each computer, component and video input source.
Press ▲▼ to select [Image 1-4] and then
press the <ENTER> button.