Using The Av Mute Function; Using The Screen Button; Using The P-Timer Button; Using The Lamp Button - Panasonic PT-VW435NU Operating Instructions Manual

Using the AV MUTE function

Button
Press the < AV MUTE> button on the remote control
to black out the image. To restore to normal, press the
< AV MUTE> button again or press any button.
When the Logo is not set, the screen changes each time
z
< AV MUTE> button as follows.
you press the
black out
The projected Logo (the logo can be set according
z
to users' favorite) is transferred from computer to
the projector by "Logo Transfer Software" on the
supplied CD-ROM and is set as [User] in the Logo
selection ( Æ page 59 the screen changes each
),
time you press the < AV MUTE> button as follows.
Logo
black out
Note
When use the <MUTE> button to release the [
z
function, the mute function can not be operated at the
same time.

Using the SCREEN button

This function allows you to select screen mode or
change the screen size.
Button
Press the <SCREEN> button on the
remote control.
Note
For details, see "Screen" of Main menu. (
z
Basic operations by using the remote control
projected image
projected image
AV mute]
Æ page 54)

Using the P-TIMER button

Press the <P-TIMER> button on the remote control to
operate the [Count up]/[Count down] function.
Button
Press <P-TIMER> button on the remote
control.
Note
To stop the count time, press the <P-TIMER> button.
z
To cancel the [P-timer] function, press and hold the
<P-TIMER> button. ( Æ page 61)

Using the LAMP button

This function allows you to select the lamp mode for
changing the brightness on the screen.
Button
Press <LAMP> button on the remote
control.
Note
For details, see "Lamp Power" of "Setting" under Main
z
Æ
menu. ( page 62)
41
ENGLISH -