Switching The Input Signal; Using The Mute Button; Using The D.zoom +/- Buttons; Using The Freeze Function - Panasonic PT-VW435NU Operating Instructions Manual

Basic operations by using the remote control

Switching the input signal

You can switch the input signals to project.
Buttons
Press (<COMPUTER 1>, <COMPUTER
2>, <HDMI>, <VIDEO>, <S-VIDEO>, or
<NETWORK>) button on the remote
control.
COMPUTER 1
COMPUTER 2
HDMI
VIDEO
S-VIDEO
NETWORK
Note
Each press of the <INPUT> button on the Control Panel
z
of the main unit switches the settings as shown below.
Æ
( page 24)
Computer 1 (RGB)/
*
Computer 1 (Scart)/
Computer 1 (Component)
Network
*
It depends on the item you selected in the
[Computer 1] submenu of the [Input] menu.
40
- ENGLISH
Switch to Computer 1(RGB)/
Computer 1(Component)/
Computer 1(Scart) input.
Switches to Computer 2(RGB)
input.
Switches to HDMI input.
Switches to Video input.
Switches to S-video input.
Switches to Network input.
Computer 2
(RGB)
S-video

Using the MUTE button

Press this button on the remote control to select [On]
to temporarily turn off the sound.
Button
Press <MUTE> button on the remote
control.
Note
To turn the sound back on, press this button again or
z
press the <VOL -/+> buttons. (

Using the D.ZOOM +/- buttons

This function allows you to enter to the Digital zoom
+/– mode.
Buttons
Press <D.ZOOM +/-> buttons on the
remote control.
Note
For details, see "Screen" of Main menu. (
z

Using the FREEZE function

You can freeze the projected image and stop the
sound temporarily, regardless of the playing condition
of the connected device.
HDMI
Button
Video
Press the <FREEZE> button on the remote control to
freeze the picture on the screen, meanwhile, volume
is muted. To cancel the Freeze function, press the
<FREEZE> button again or press any other button.
Fig.1 will appear on the screen while the Freeze
function is working.
Fig.1
Note
When no signal inputs,
z
Æ page 57)
Æ
page 55)
mark will appear.