Picture Menu - Hitachi CP-WX3014WN Operating Manual

PICTURE menu

PICTURE menu
From the PICTURE menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or
execute the item. Then perform it according to the
following table.
(continued on next page)
32
Using the ◄/► buttons adjusts the brightness.
Dark Light
Using the ◄/► buttons adjusts the contrast.
Weak Strong
Using the ▲/▼ buttons switches the gamma mode.
1 DEFAULT 1 CUSTOM
6 CUSTOM
6 DEFAULT 5 CUSTOM
Selecting a mode whose name includes CUSTOM and then
pressing the ► button or the
a dialog to aid you in adjusting the mode.
This function is useful when you want to
change the brightness of particular tones.
Choose an item using the ◄/► buttons,
and adjust the level using the ▲/▼ buttons.
You can display a test pattern for checking the effect of your
adjustment by pressing the
Each time you press the
pattern changes as below.
No pattern Gray scale of 9 steps
Ramp
The eight equalizing bars correspond to eight tone levels of the test
pattern (Gray scale of 9 steps) except the darkest in the left end. If you
want to adjust the 2nd tone from left end on the test pattern, use the
equalizing adjustment bar "1". The darkest tone at the left end of the
test pattern cannot be controlled with any of equalizing adjustment bar.
• Lines or other noise might appear on the
screen when this function is operated, but it
is not a malfunction.
button to
2 DEFAULT
5 DEFAULT
button displays
button.
button, the
Gray scale of 15 steps
2 CUSTOM 3 DEFAULT
3 CUSTOM
4 CUSTOM 4 DEFAULT