IMAGE menu
From the IMAGE menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or
execute the item. Then perform it according to the
following table.
(continued on next page)
Using the ▲/▼ buttons switches the mode for aspect ratio.
CP-X2514WN, CP-X3014WN, CP-X4014WN:
NORMAL
CP-WX3014WN: NORMAL
CP-X2514WN, CP-X3014WN, CP-X4014WN:
NORMAL
CP-WX3014WN: NORMAL
CP-X2514WN, CP-X3014WN, CP-X4014WN:
4:3
CP-WX3014WN: 4:3
CP-X2514WN, CP-X3014WN, CP-X4014WN: 4:3 (fixed)
CP-WX3014WN: 16:10 (fixed)
• The NORMAL mode keeps the original aspect ratio of the signal.
Using the ◄/► buttons adjusts the over-scan ratio.
Small (It magnifies picture)
• This item can be selected only for a video, s-video and component
video signal.
TM
• For an HDMI
signal, this item can also be selected if either (1) or
(2) applies.
(1) HDMI FORMAT item in the INPUT menu is set to VIDEO.
(2) HDMI FORMAT item in the INPUT menu is set to AUTO, and the
projector recognizes that it receives video signals.
button to
4:3
16:9
4:3
16:9
4:3
16:9
4:3
16:9
16:9
14:9
16:9
16:10
Large (It reduces picture)
IMAGE menu
16:10
16:10
NATIVE
16:10
14:9
16:10
14:9
14:9
NATIVE
NATIVE
35