Turning Off The Power - Hitachi CP-WX3014WN Operating Manual

Turning off the power

1. Press the
projector or the remote control.
The message "Power off?" will appear
on the screen for about 5 seconds.
2. Press the
while the message appears.
The projector lamp will go off, and the
indicator will begin blinking in
orange. Then the
stop blinking and light in steady orange
when the lamp cooling is complete.
3. Attach the lens cover, after the
indicator turns in steady orange.
Do not turn the projector on for about 10 minutes or more after turning it off.
Also, do not turn the projector off shortly after turning it on. Such operations might
cause the lamp to malfunction or shorten the lifetime of some parts including the lamp.
WARNING ►Do not touch around the lamp cover and the exhaust vents
during use or just after use, since it is too hot.
►Remove the power cord for complete separation. The power outlet should be
close to the projector and easily accessible.
NOTE • Please power off the projector after any connected devices are
powered off.
• This projector has the AUTO POWER OFF function that can make the
projector turn off automatically. For more information, please see
12
button on the
button again
indicator will
.
button
indicator