Using The Automatic Adjustment Feature; Adjusting The Position - Hitachi CP-WX3014WN Operating Manual

Operating

Using the automatic adjustment feature

Press
1.
Pressing this button performs the following.
The vertical position, the horizontal position and the horizontal
phase will be automatically adjusted.
Make sure that the application window is set to its maximum size
prior to attempting to use this feature. A dark picture may still be
incorrectly adjusted. Use a bright picture when adjusting.
The video format best suited for the respective input signal will be selected
automatically. This function is available only when the AUTO is selected for
the VIDEO FORMAT item in the INPUT menu (
horizontal position will be automatically set to the default.
The vertical position and horizontal position will be automatically set to the default.
The horizontal phase will be automatically adjusted.
● The automatic adjustment operation requires approx. 10 seconds. Also please
note that it may not function correctly with some input.
● When this function is performed for a video signal, a certain extra such as a line
may appear outside a picture.
● When this function is performed for a computer signal, a black frame may be
displayed on the edge of the screen, depending on the PC model.
● The items adjusted by this function may vary when the FINE or DISABLE is selected
for the AUTO ADJUST item of the SERVICE item in the OPTION menu (

Adjusting the position

Press
1.
indicated.
The "POSITION" indication will appear on the screen.
Use the ▲/▼/◄/► cursor buttons to adjust the picture position.
2.
When you want to reset the operation, press
the remote control during the operation.
To complete this operation, press
you do not do anything, the dialog will automatically disappear
after a few seconds.
● When this function is performed on a video signal or an s-video signal, some image
such as an extra-line may appear at outside of the picture.
● When this function is performed on a video signal or s-video signal, the range of
this adjustment depends on OVER SCAN in IMAGE menu (
possible to adjust when OVER SCAN is set to 10.
● If
picture does not move its position but the menu does.
● This function is unavailable for a signal from the
or port.
24
button on the remote control.
button on the remote control when no menu is
button is pressed when a menu is indicated on screen, the displayed
39). The vertical position and
button on
button again. Even if
,
button
VIDEO COMPUTER MY SOURCE/
DOC.CAMERA
ASPECT AUTO
SEARCH BLANK
MAGNIFY FREEZE PAGE VOLUME
UP
ON
DOWN
OFF
MY BUTTON
KEYSTONE MUTE
57).
POSITION MENU
ENTER
ESC
RESET
button
35) setting. It is not
,