Audio Menu - Hitachi CP-WX3014WN Operating Manual

AUDIO menu

From the AUDIO menu, items shown in the table
below can be performed. Select an item using the
▲/▼ cursor buttons, and press the ► cursor button
or the button to execute the item. Then
perform it according to the following table.
(continued on next page)
Using the ◄/► buttons adjusts the volume.
Low High
Using the ▲/▼ buttons turns on/off the built-in speaker.
ON OFF
When OFF is selected, the built-in speaker does not work.
While the image signal from the input port chosen in step (1) is
projected, the audio signal from the input port selected in step
(2) is output to both the
this projector. However, the built-in speaker does not work when
SPEAKER is set to OFF.
(1) Choose a picture input port using the
▲/▼ buttons.
Choose STANDBY to select the sound
output in the standby mode.
(2) Select an audio input port or the
mute icon using the ◄/► buttons.
The icons indicate the following.
No.1:
No.3:
No.5:
No.7: port
• Audio input from port nos.4 to 7 can only be selected by each of
the picture input ports.
• Even if the projector is in the standby mode, cooling fans may
work and make noises when the built-in speaker is in operation.
• C.C. (Closed Caption) is automatically activated when
and an input signal containing C.C. is received. This function is
available only when the signal is NTSC for
480i@60 for
and when AUTO is selected for DISPLAY in the C.C. menu under the
SCREEN menu (
port and built-in speaker of
port No.2:
ports No.4:
port No.6:
: mutes the sound
,
52).
AUDIO menu
port
port
port
is selected
or
or
, or
,
45