Communication Settings - Hitachi CP-WX3014WN Operating Manual

Network Bridge Communication (continued)

Communication settings

For communication setting, use the OPTION - SERVICE - COMMUNICATION
menu. ( OPTION menu - SERVICE - COMMUNICATION in the Operating
Guide)
Item
BAUD RATE
Data length
PARITY
Start bit
Stop bit
Transmission method
NOTE • For connecting the projector to your devices, please read the
manual for each devices, and connect them correctly with suitable cables.
• Turn off (the power of ) both the projector and other devices and unplug ,
beore connecting them.
• For details of Transmission method, refer to 6.4 Transmission method in the
Network Guide.
16
Condition
4800bps / 9600bps / 19200bps / 38400bps
8 bit (fixed)
NONE/ODD/EVEN
1 bit (fixed)
1 bit (fixed)
HALF-DUPLEX/FULL-DUPLEX