Using The Menu Function - Hitachi CP-WX3014WN Operating Manual

Operating

Using the menu function

This projector has the following menus:
PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK,
SECURITY and EASY MENU.
EASY MENU consists of functions often used, and the other menus are classified
into each purpose and brought together as the ADVANCED MENU.
Each of these menus is operated using the same methods. While the projector
is displaying any menu, the
buttons. The basic operations of these menus are as follows.
To start the MENU, press the
1.
or ADVANCED) will appear. EASY MENU has priority to appear just after
powered on.
2.
(1) Use the ▲/▼ cursor buttons to select an item to
operate. If you want to change it to the ADVANCED
MENU, select the ADVANCED MENU.
(2) Use the ◄/► cursor buttons to operate the item.
(1) Use the ▲/▼ cursor buttons to select a menu.
If you want to change it to the EASY MENU,
select the EASY MENU.
The items in the menu appear on the right side.
(2) Press the ► cursor button or
move the cursor to the right side. Then use the
▲/▼ cursor buttons to select an item to operate and press the ► cursor
button or
selected item will appear.
(3) Use the buttons as instructed in the OSD to operate the item.
(continued on next page)
28
button on the projector works as the cursor
button
POSITION
button
ENTER
button
ESC
button to progress. The operation menu or dialog of the
MENU
(Cursor buttons)
Cursor buttons
RESET
button
button. The MENU you last used (EASY
button to
button