Usb Display - Hitachi CP-WX3014WN Operating Manual

USB Display (continued)
This application will appear in the Windows
notification area once it starts. You can quit the
application from your computer by selecting "Quit" on
the menu.
NOTE • The "LiveViewer" (refer to the
be used at the same time. If you connect your
computer to the projector by using a USB cable
while the "LiveViewer" is running, the following message will be displayed.
• Depending on the software installed on your computer, images on your
computer cannot be transferred using "LiveViewer Lite for USB".
• If any application software having the firewall function is installed into your
computer, make the firwall function invalid with following the user's manual.
• Some security software may block image transmission. Please change the
security software setting to allow the use of "LiveViewer Lite for USB".
• When the audio input from
is still low even after raising the volume level in the projector to the maximum,
check whether your computer outputs audio and raise the volume level
accordingly.
) and this application cannot
45) is selected, if the sound level
(
Presentation tools
91