Discard Changes; Save Changes - IBM NetVista Hardware Maintenance Manual

A dialog box appears confirming if you want to
save the settings (in this case, the default settings
that you reloaded).
4. Use the left-arrow key to select Yes, then press
Enter to exit.
You must load the Setup default settings in the
following instances:
•
When you replace the system battery.
•
When you customize the system configuration
settings and some resource assignments conflict
causing the computer to stop responding.

Discard Changes

Select this parameter, there will be another sub-menu
asking you to confirm loading previous configuration.
The default value is Yes. If Yes, all the changes
made before will be undone.

Save Changes

Select this parameter, there will be another sub-menu
asking you to confirm saving configuration changes.
The default value is Yes. If Yes, all the changes
made before will be saved.
22 IBM Desktop System HMM