[Fax Function Settings] - Konica Minolta bizhub C35 User Manual

Item
[Tray Selection for
RX Print]
[Min. Reduction for
RX Print]
[Print Separate Fax
Pages]
[Duplex Print (RX)]

[Fax Function Settings]

Item
[F-Code TX]
[Dest. Check Display
Func.]
[Fax Settings] (Admin Settings)
Description
Settings [Auto] / [Tray 1] / [Tray 2] / [Tray 3] /
[Tray 4]
Select the paper drawer to be used when a specific
paper drawer is used for printing received docu-
ments.
[Tray 3] and [Tray 4] do not appear if the
optional lower feeder units have not been
installed.
Settings [87%] - [96%] / [100%]
Specify the reduction ratio (%) used for printing
received documents.
Settings [ON] / [OFF]
Select whether or not pages are split when the
received document is longer than the standard paper
size.
When [Duplex Print (RX)] is set to [ON], this parame-
ter does not appear.
Settings [ON] / [OFF]
Select whether or not received documents are printed
on both sides of paper.
When [Print Separate Fax Pages] is set to [ON], this
parameter does not appear.
Description
Settings [ON] / [OFF]
Select whether or not F-code transmissions are used.
Settings [ON] / [OFF]
Select whether or not the list of specified destinations
is printed before the fax is sent.
2-13