[Comm. Settings] - Konica Minolta bizhub C35 User Manual

Item
[Footer Position]

[Comm. Settings]

Item
[PB/DP]
[RX Mode]
[Number of RX Call
Rings]
2-10
Description
Settings [Inside Body Text] / [Outside Body Text] /
[RX Ft. OFF]
Select the position for the reception information
(reception time and reception number) printed in doc-
uments received by this machine.
If [RX Ft. OFF] is selected, the reception information
is not printed.
Description
Settings [PB] / [10pps] / [20pps]
Select the dialing method according to the operating
environment being used.
The default setting differs depending on the
setting selected for [Admin Settings] - [Fax
Settings] - [Fax Target]. If [Fax Target] is set to
a country that is not compatible with [20pps],
[20pps] does not appear.
Settings [Auto RX] / [Manual RX] / [DRPD]
Select the reception method.
[Auto RX]: Automatic reception
[Manual RX]: Manual reception; Select this setting if
an external telephone is connected and the phone
line is often busy, or if remote reception is to be used.
[DRPD]: If the receiver rings with the pattern selected
from the four ring patterns available, the incoming call
is automatically received as a fax. If [DRPD] is
selected, select the ring pattern for faxing with [Ring
Pattern].
Settings [1] - [15] ([2])
Specify how many rings are produced until the
machine begins receiving the fax when it is set for
automatic reception.
The available settings and the default setting
differ depending on the setting selected for
[Admin Settings] - [Fax Settings] - [Fax Target].
[Fax Settings] (Admin Settings)