Konica Minolta bizhub C35 User Manual page 28

Item
[Default Fax Settings] Settings
[Display Fax Activity] Select whether or not transmission/reception infor-
[Fax TX]
[Fax RX]
[Fax Settings] (User Settings)
Description
[Factory Default] / [Current Setting]
Select the default settings for the parameters on the
[Scan Settings], [Comm. Settings] and [Original Set-
tings] screens that are selected when the machine is
turned on or the [Reset] key is pressed.
[Factory Default]: The default settings are the manu-
facturer's default settings.
[Current Setting]: The default settings are the current
settings.
mation is displayed in the control panel while send-
ing/receiving G3 faxes.
Settings [ON] / [OFF]
Select whether or not the number of originals,
address, ID and number of destinations are displayed
while G3 faxes are being sent.
Settings [ON] / [OFF]
Select whether or not the number of originals and ID
are displayed while G3 faxes are being received.
2-3