Specifying destinations
Use any of the following methods to specify destinations.
"Selecting from the registered destinations" on page 3-7
"Directly typing in the address" on page 3-8
"Selecting from the log" on page 3-9
"Selecting with an LDAP search" on page 3-10
Selecting from the registered destinations
An address book destination or group destination can be selected from those
previously registered on the machine.
In order to select a registered destination, address book destinations
and group destinations must first be registered on the machine. For
details, refer to "Registering destinations" on page 6-1.
Selecting from the Favorites list
When destinations are registered, they can be specified as [Favorites].
As a default, the [Favorites] destination list appears when the initial Fax
screen is displayed.
Select a destination from the list. To specify multiple destinations for a broad-
cast transmission, select all destinations where the fax is to be sent.
The setting for the Favorites list can be specified for a destination
when it is registered. For details, refer to "Registering destinations" on
page 6-1.
Selecting with an index search
Destinations can be selected by searching for the index characters specified
when each destination was registered.
1
In the initial Fax screen, press
2
Press the desired index tab to search the destinations.
–
If the desired index tab is not displayed, press [
desired tab appears.
–
To select a group destination, press [Group].
Specifying destinations
.
] or [
] until the
3-7